In diesem Bereich kann das Team die Webseiten-Einstellungen pflegen.
Öffnungszeiten ändern
Infkasten bearbeiten
Feiertage
Die kommenden Feiertage werden nun automatisch berechnet. Hier eine Übersicht der kommenden Feiertage:
Schließtage
Hier können weitere Schließtage ergänzt werden.
Sicherheitseinweisung - Übersicht der Ergebnisse
Es werden nur erfolgreiche Sicherheitseinweisungen gespeichert und angezeigt. Die Daten bleiben max. 1,5 Jahre in der Datenbank gespeichert.
Ergebnis / falsche Antworten
675
14.03.2025 08:32
This email address is being protected from spambots. You need JavaScript enabled to view it.
80,65 % korrekt beantwortet (25 von 31 Fragen)
In which places can you stop without a beacon in the oval? Do not stop in the oval under any circumstances without a beacon. Driving stops are allowed only in the parking bays on the straights.
What beacon do you need to carry when running high-dynamic tests on the oval? One green and one blue beacon. Only one white flashing light is necessary.
What is the maximum speed allowed for a static friction jump or µ-split on the brake measurement section? A maximum speed of 50 km/h applies at µ-split. A maximum speed of 70 km/h applies for µ-split.
How is the return from the braking track regulated in case of non-exclusive booking? The braking section has a shortcut to the vehicle dynamics area that can be used. It must be returned through the oval.
You are driving in the urban environment with two other customers. Which regulation is correct? As a regulation, it is sufficient for all customers to coordinate among themselves. An agreement with the other customers is necessary. In addition, the StVO applies.
Why is it important to specify the desired test direction when booking? To avoid the glare of the sun depending on the direction. To avoid oncoming traffic.
674
13.03.2025 21:51
This email address is being protected from spambots. You need JavaScript enabled to view it.
80,65 % korrekt beantwortet (25 von 31 Fragen)
Where are the emergency collection points located? Emergency assembly points are located in front of the main building, next to the hill section and in the middle of the vehicle dynamics area. Emergency assembly points are located in front of the main building, next to the hill section and at the garages near the urban environment.
What beacon do you need to carry when running high-dynamic tests on the oval? Only one red beacon is necessary. Only one white flashing light is necessary.
In which places can you stop without a beacon in the oval? Do not stop in the oval under any circumstances without a beacon. Driving stops are allowed only in the parking bays on the straights.
How do you reach the handling course? To reach the handling track, the oval must be crossed at the office building. To reach the handling course, the oval must be circumnavigated until behind the first curve, where there is a turn-off lane. To reach the handling course, the oval must be circumnavigated once. Opposite the office building, you can turn right into the infield.
What is the direction of travel of the handling course? The handling track is driven counterclockwise. The handling track is driven in a clockwise direction.
You are driving in the urban environment with two other customers. Which regulation is correct? An agreement with the other customers is not necessary, the StVO applies. An agreement with the other customers is necessary. In addition, the StVO applies.
673
13.03.2025 21:09
This email address is being protected from spambots. You need JavaScript enabled to view it.
83,87 % korrekt beantwortet (26 von 31 Fragen)
Where is smoking and drinking allowed on the test track? Smoking and drinking is strictly prohibited throughout the area. Smoking is allowed only in the designated areas. There is a ban on drinking on the entire premises.
What beacon do you need to carry when running high-dynamic tests on the oval? Only one red beacon is necessary. Only one white flashing light is necessary.
What is the maximum speed allowed for a static friction jump or µ-split on the brake measurement section? A maximum speed of 60 km/h applies at µ-split. A maximum speed of 70 km/h applies for µ-split.
What is the maximum speed allowed on the irrigated tile area? A maximum speed of 90 km/h is allowed on the irrigated tile surface. A maximum speed of 70 km/h is allowed on the irrigated tile surface.
Why is it important to specify the desired test direction when booking? To avoid the glare of the sun depending on the direction. To avoid oncoming traffic.
672
13.03.2025 20:55
This email address is being protected from spambots. You need JavaScript enabled to view it.
80,65 % korrekt beantwortet (25 von 31 Fragen)
Where are the emergency collection points located? Emergency assembly points are located in front of the main building, next to the hill section and in the middle of the vehicle dynamics area. Emergency assembly points are located in front of the main building, next to the hill section and at the garages near the urban environment.
In which places can you stop without a beacon in the oval? Do not stop in the oval under any circumstances without a beacon. Driving stops are allowed only in the parking bays on the straights.
What is the maximum speed allowed on the irrigated tile area? A maximum speed of 80 km/h is allowed on the irrigated tile surface. A maximum speed of 70 km/h is allowed on the irrigated tile surface.
What is the maximum speed allowed for a static friction jump or µ-split on the brake measurement section? A maximum speed of 50 km/h applies at µ-split. A maximum speed of 70 km/h applies for µ-split.
What exits are there at the driving dynamics area? To leave the vehicle dynamics area, the approach is retracted. To leave the vehicle dynamics area, the return path is used. The shortcut can be used to exit the vehicle dynamics area.
What should be taken into account when driving on the hill section? The irrigable area on the 12 % slope may only be driven on when dry. The irrigable area on the 12 % slope may only not be driven on when dry.
671
13.03.2025 15:49
This email address is being protected from spambots. You need JavaScript enabled to view it.
90,32 % korrekt beantwortet (28 von 31 Fragen)
You would like to test a fully automated vehicle. What are the requirements for this? The driver must have completed a driver safety training course.
The desired route element must be booked exclusively. In addition, the ride must be accompanied by a safety driver.
In which places can you stop without a beacon in the oval? Do not stop in the oval under any circumstances without a beacon. Driving stops are allowed only in the parking bays on the straights.
Why is it forbidden to drive on the 12% slope in dry conditions? Due to the increased coefficient of static friction. So that the covering is not damaged
670
12.03.2025 13:15
This email address is being protected from spambots. You need JavaScript enabled to view it.
80,65 % korrekt beantwortet (25 von 31 Fragen)
What is the purpose of the On Board Unit? The OBU creates invoices and independently deducts the amounts to be paid from your account. The OBU locates the exact position of your vehicle. The OBUs in the vehicles detect dangers among themselves and warn you as the driver. In case of emergency, you can use the OBU to call the dispatcher directly. You can contact other drivers on the test track, who are also in a vehicle with OBU, by phone via the OBU.
You would like to travel the bad road route. Why is this information important when booking? So that the dispatcher can ensure that no other vehicles are on the oval during the tests. So that the dispatcher can coordinate the test with other customers, e.g. because of accustics measurements.
You are driving in the urban environment with two other customers. Which regulation is correct? An agreement with the other customers is not necessary, the StVO applies. An agreement with the other customers is necessary. In addition, the StVO applies.
What should be taken into account when driving on the hill section? The direction of travel can always be self-determined. The irrigable area on the 12 % slope may only not be driven on when dry.
How do you reach the hill section from the site? Left of the oval through the side gate in the south curve. Through the main entrance gate, then right across the private road.
Why is it forbidden to drive on the 12% slope in dry conditions? To save the tires. So that the covering is not damaged
669
12.03.2025 11:09
This email address is being protected from spambots. You need JavaScript enabled to view it.
87,10 % korrekt beantwortet (27 von 31 Fragen)
What documents are required for you to test at the Aldenhoven Testing Center? To be able to test, a booking request via the web form is sufficient. A booking confirmation from the dispatcher is sufficient to perform tests.
Where is smoking and drinking allowed on the test track? Smoking and drinking is strictly prohibited throughout the area. Smoking is allowed only in the designated areas. There is a ban on drinking on the entire premises.
What should you do if you want to drive onto the handling course and there are already two cars on it? Just drive there, as more than two vehicles are allowed. Talking to the dispatcher and waiting for instructions.
How do you reach the hill section from the site? Through the main entrance gate, then left across the private road. Through the main entrance gate, then right across the private road.
668
10.03.2025 12:21
This email address is being protected from spambots. You need JavaScript enabled to view it.
96,77 % korrekt beantwortet (30 von 31 Fragen)
Welche maximale Geschwindigkeit ist bei µ-Split auf der Bremsmessstrecke erlaubt? Bei µ-split gilt eine Maximalgeschwindigkeit von 60 km/h. Bei µ-split gilt eine Maximalgeschwindigkeit von 70 km/h.
667
07.03.2025 16:10
This email address is being protected from spambots. You need JavaScript enabled to view it.
93,55 % korrekt beantwortet (29 von 31 Fragen)
Wie gelangen Sie zur Fahrdynamikfläche? Die Fahrdynamikfläche kann von der Bremsenstrecke aus über den Shortcut angefahren werden. Zum Erreichen der Fahrdynamikfläche muss das Oval halb umfahren werden. Dort kann man rechts ins Infield abbiegen.
Worauf ist beim Befahren des Steigungshügels zu achten? Die Fahrtrichtung darf immer selbstbestimmt werden. Die bewässerbare Fläche auf der 12 %igen Steigung darf nicht im trockenen Zustand befahren werden.
666
07.03.2025 15:26
This email address is being protected from spambots. You need JavaScript enabled to view it.
83,87 % korrekt beantwortet (26 von 31 Fragen)
Wie lang ist der Bremsweg aus 80 km/h auf trockener Fahrbahn? Der Bremsweg beträgt 100 Meter. Der Bremsweg beträgt 25 bis 30 Meter.
Wo ist das Rauchen und Trinken auf der Teststrecke erlaubt? Es ist nur auf den ausgewiesenen Flächen erlaubt zu trinken und zu rauchen. Es ist nur auf den ausgewiesenen Flächen erlaubt zu rauchen. Es herrscht auf dem gesamten Gelände ein Trinkverbot.
Sie möchten die Schlechtwegstrecke befahren. Warum ist diese Angabe bei der Buchung wichtig? Damit der Dispatcher die Schlechtwegstrecke für andere Kunden absperren kann. Damit der Dispatcher den Test mit weiteren Kunden, z. B. wegen Akustikmessungen, abstimmen kann.
Warum ist das Befahren der 12%igen Steigung in trockenem Zustand untersagt? Aufgrund des erhöhten Haftreibungsbeiwerts. Damit der Belag nicht beschädigt wird
Wie erreichen Sie den Steigungshügel von der Anlage aus? Durch das Haupteingangstor, dann links über die Privatstraße. Durch das Haupteingangstor, dann rechts über die Privatstraße.
![[Logo: Aldenhoven Testing Center]](https://www.aldenhoven-testing-center.de/images/atc-logo-a-ohne-schatten-rgb.svg){kind=logo}
![[Foto: TUNE IT! SAFE!]](/images/slides/tuneitsafe.webp)
![[Foto: Vision-S - erstes Elektro-Auto von Sony]](/images/slides/VS_Release_5Gtest.webp)
![[Foto: Vodafone Testfahrzeuge]](/images/slides/vodafone-event.webp)
